wtf panch? all you do is take the brake caliper off, brake rotor, shit load of pb blast the bolt tahts broken, and slam that shit a few times with a hammer. should fly right out. then get the new stud, put it in the hub, and use a open end lug nut and tighten it into the hub. put everything back and there you go.
wtf panch? all you do is take the brake caliper off, brake rotor, shit load of pb blast the bolt tahts broken, and slam that shit a few times with a hammer. should fly right out. then get the new stud, put it in the hub, and use a open end lug nut and tighten it into the hub. put everything back and there you go.
I know the studs are not on the hub, but for future reference can you slap some anti-seize on them so you don't have this issue in the future. even though the studs are going into the hub it should still work the same way no? if so lube em up mate.