Dramatic Help Timeing Issues

All right i need some major help i just did the head gasket on my twin cam and am boosting it but it wont start ive done the timing 500000000000000000000000000 times and it wont star i got spark and fuel but it wont start i need some seriouse help am going to kill my self it i dont and on how to install a safc2
 
Hey! I think your the guy i bought the KA from. Well put the car on tdc, wich is the second from the left mark on the crank pully. If you can post a pic of all the marks you have... the big gear and the two cam gears. Let me see that first then i can help. If you are putting the distributor correctly make sure you on no.1... If it doesn't start you might me 180degrees off. You can take the no.1 sparkplug out and put a long 1/4 inch extension on the top of the piston. then go by the crank mark to set it for TDC. Check the distributor. Make sure it is on no.1 if it isn't then set it.

If it doesn't start at all take the bolts off of the dizzy and start moving the distributor a lot and see if you get something. More than likely the timing on the engine might be wrong. If it turns on and sputters or doesn't stay on.

Post back if any of this helps you or you have any more questions..

Oh yeah by the way the engine is still running great. But it has always leaked oil like a bitch from the front timing cover, its not bad really but sucks because I thought it didn't leak at all. And someone messed up the headgasket part that is under the top front timing cover. That shit was leaking like crazy and someone cut a piece of the lower timing cover.
But the engine has been great and running good on boost.!!!
 
to start a car you need air.fuel.spark....does the car even turn on at all atleast for a second.if it does it cold be the way your doing timing...also you say you have gas and fuel right.maybe your mass airflow is fucked.
 
i need really big help i was going to to c da drift practice on saturday but i want to go do my car so am not if someone is willing to help me plz dats all i ask i need help let me know
 
well i checked compresion and i have about 50 psi to 65 in all cylinders and furl leaked into the oil i need help i bought a cosmetic head gasket so ill get it in a week am going to put new rings and rod bearings
 
i got the head gasket but i need help cuz my tools r in my mustang and dat car got towed so am toolless i need help and tool this is my final pleed
 
Back
Top Bottom