So first off here's the setup
Blacktop sr20det
Rci 12gal fuel cell with foam
-8AN feed and return lines
Factory fuel rail with -8AN fittings welded onto it
Aeromotive A1000-6 fpr
Stock 370cc injectors
Try to start and it either gets too much fuel and floods or starts and breaks up when revved. The fpr is set to right around 43psi. Which I'm told is stock. Now being that the feed and return lines are bigger than stock do I have to lower the pressure? Or is it another issue?
Blacktop sr20det
Rci 12gal fuel cell with foam
-8AN feed and return lines
Factory fuel rail with -8AN fittings welded onto it
Aeromotive A1000-6 fpr
Stock 370cc injectors
Try to start and it either gets too much fuel and floods or starts and breaks up when revved. The fpr is set to right around 43psi. Which I'm told is stock. Now being that the feed and return lines are bigger than stock do I have to lower the pressure? Or is it another issue?