What tie rod setup are you running?

I

IThaJokaI

Driver
Well out street drifting the other night, I hit full lock pretty hard and bent a stock inner tie rod.

Now I'm using this as an excuse to upgrade, so what are you guys running as far as aftermarket setups?
 
i use ikeya forrula inners cause there super adjustable work with any inner outer combo and cut knuckles stock knucks whatever there sweet
 
z32s are better than S chassis factory, good for a cheap beefier replacement. I havnt had any problems yet on my z32. But if you wanna spend a lil money ikeya ftw.
 
To run z32 you have to use SPL outters, correct? I dont have 300$ to dump on them at this current moment.

But I do want to get rid of the bumpsteer, that causes them to bend.
 
If mine ever do bend, then i'll probably get z32 inners pair with my dmax outers then i should be able to use this dmax adapter i have too.
 
IThaJokaI said:
To run z32 you have to use SPL outters, correct? I dont have 300$ to dump on them at this current moment.

But I do want to get rid of the bumpsteer, that causes them to bend.
Click to expand...

I've never heard of that. they recommend you upgrade to z32s inners when purchasing spl outers due to their beefierness, but now z33s are the hot stuff, but z32s are still good for the price, cause you can find them used.
 
IThaJokaI said:
I don't really trust MR parts all that much, I know some people have good experiences with them and what not.
Click to expand...

When it comes to the inner tie rods, the megan's are straight. I got mine from Jackson performance after the ball joint went out on my peak performance pro inners and to my surprise the megan's were beefier and seem like better construction. They got em for me fast and at a good ass price too.
 
BILLFISHER21 said:
i use ikeya forrula inners cause there super adjustable work with any inner outer combo and cut knuckles stock knucks whatever there sweet
Click to expand...

ikeya i heard it the shit

Tonymac said:
When it comes to the inner tie rods, the megan's are straight. I got mine from Jackson performance after the ball joint went out on my peak performance pro inners and to my surprise the megan's were beefier and seem like better construction. They got em for me fast and at a good ass price too.
Click to expand...

thanks for the plug

mr is probally the best for the money
curently i use a tein inner and outter on the left and a s14 inner and outter on the right both with spacers no reason just what i had around
 
Last edited:
ikeya formula is cheap only 80$ and you can use any outer. DONE And your ready for future mods with the stupid awesome ajustment they have.
 
You must log in or register to reply here.
Back
Top Bottom