z32 and s14 inner tierods

metalrocks12

metalrocks12

Driver
anyone know if you can use z32 inners on an s14?

i wana buy the s14 tie rods that pbm sells but they arent sure if itll work, also are the ones on an s14 the same lenght? im thinking of the pbm cus they are longer but dont know if the stock ones are the same or not

thanks
 
yes you mother fucker! I told you, an upgrade for s chassis IS z32 inners, thats what SPL use to sell w there tie rod ends before the z33s came out. cause the NEW upgrade is z33 inners.

they are longer and thicker. for the ladies.
 
^you are slow, he is saying that z32s are thicker, but s14s will work on a z32
 
Vas said:
^you are slow, he is saying that z32s are thicker, but s14s will work on a z32
Click to expand...

no your slow, i know the rod its self is thicker but i was reading up and the thread is thicker too, thats my question from what ive been reading a z32 inner wont thread into an s14 outer. when people talk on all the forums ive looked at it seems that everone that upgrades to z32 inners also uses the outers. everyone keeps saying the thread pitch is the same but not the thickness, anyone have input on that? the big question is if i get s14 inners will i need s14 outers as well????
 
s14 outer tie rod should work on z32 inner tie rod
s14 are 14mm thread and s13 are 12mm thread, most companies use the bigger s14 size hence why most s13 people can't use s13 outers on bigger inner tie rods, they'd have to convert to s14/z32 tie rods.

*edit*
well most aftermarket S-Chassis outer Tie-rods use the S14/Z32/Z33 inner tie-rod thread pitch, but not sure about stock outers.

*edit edit*
its all good man, gotta get accurate info so you don't fuck up.
funny im getting moog z32 inners but aftermarket outers lol, your doing opposite :p.
 
Last edited:
^ ahh ok
and you have done it right??

---------- Post added at 03:32 AM ---------- Previous post was at 03:20 AM ----------

o ok i see, thats why i was reading about people were the threads didnt match up. ill just order the pbm inners and some new s14 outers

thanks for the info dude

---------- Post added at 03:40 AM ---------- Previous post was at 03:32 AM ----------

well if i get get the inners and everything matches up ill prob be ordering some spl outers. i just want that pbm inners cus they are sexy lol my only other choice would be wicked inner/outer but i need to get the total length of the s14 inners to compare to what they sell. fucking with cars makes life so much harder lol
 
metalrocks12 said:
no your slow, i know the rod its self is thicker but i was reading up and the thread is thicker too, thats my question from what ive been reading a z32 inner wont thread into an s14 outer. when people talk on all the forums ive looked at it seems that everone that upgrades to z32 inners also uses the outers. everyone keeps saying the thread pitch is the same but not the thickness, anyone have input on that? the big question is if i get s14 inners will i need s14 outers as well????
Click to expand...

why dont you ask PBM? anytime I have a question about anyones product, I simply email them and I get my answer everytime.
 
i did, sent them an email asking if it would fit my z and they told me they had never done it before so they couldnt give me a legit answer.
 
You must log in or register to reply here.
Back
Top Bottom