Will they fit? 17x9 - PCD 4x114.3 - ET 27

gvilleracer

gvilleracer

Driver
Its going on a hatch with GAB coil overs.
Right now I use spec-V 17's with no spacers and they don't rub (does anyone know what there offset is), but i like the look of these.
Do you guys think I will have any clearance issues with the suspenision or body?
Will I need to roll the fronts?
Will I need a rear spacer to make them look even?

Check http://www.edgeracing.com/1991/Nissan/240SX/bundle/6002/ To see the tire size they recomend. Do you think I could fit a little more front or rear? For some reasone, you may have to try the link twice for it to go to the right page, I do.

I know its a lot of questions; but, I am still not familiar w/ tire options for my 180. I havn't had it more than a few weeks.
 
Last edited:
Yeah you'll prolly hit the coilover in the front but in the rear you'll be OK. I was running +15 in the front with no issues. 10mm spacer minimum but 15 or 20 will enhance the look more.

If you want your car to look even better, opt for the 18x9.5" +20 rears. Double stagger FTW.
 
Thanks for the info.
I like the 18's but they are for 5 lugs. I don't have the hubs for them yet.

So, is the front track narrower than the rear; or, is it just that the front fender is farther out from the mounting face than the rear?
 
Last edited:
There's way more clearance on the coilover side in the rear. You might have to roll the rears with those 9's depending on the tire size you get (which if I were you, i'd run 235/40's all around) but nothing major. A little work with a bat should do it.
 
you can run 17x9 +25 on the front of S13s with stock style suspension, dont know about coilovers, problem is you cant run alot of camber and you have to run a 225 or smaller width tire. if I had a drift car I would run 18x9.5+20 with a 225/40/18 front tire and a 18x10.5R with a 255/35/18 R must have 400-500 hp though lol
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom