What do u think?

Status
Not open for further replies.
kleen555 said:
Since I just installed the isis manifold on my car I will put my .02 in... For the money it is good. That being said, it fit like shit. I had to reem out every hole in order just to get it to go over the studs. And I don't mean a little, I am actually a little concerned with how much material I had to remove. Looks like the jig they are using is off, or maybe I just got one of the bad ones in the bunch. I have installed many different types of exh manifold on sr20's and I have never had to do that to any other manifold.

Aside from the fitment I have no complaints. Quality of the material and welds appear to be good. Once on teh engine there were no probelms fitment wise anywhere else. Plenty of clearance from bmc, steering shaft etc.
Even with the fitment problems I would recommend it to others as the closest "name brand" manifold is at least twice as much $, but like in anything else in life, you get what you pay for.
Click to expand...

ok black guy what can u tell me about this fitment issue with the manni on sr's?
 
kleen555 said:
Since I just installed the isis manifold on my car I will put my .02 in... For the money it is good. That being said, it fit like shit. I had to reem out every haole in order just to get it to go over the studs. And I don't mean a little, I am actually a little concerned with how much material I had to remove. Looks like the jig they are using is off, or maybe I just got one of the bad ones in the bunch. I have installed many different types of exh manifold on sr20's and I have never had to do that to any other manifold.

Aside from the fitment I have no complaints. Quality of the material and welds appear to be good. Once on teh engine there were no probelms fitment wise anywhere else. Plenty of clearance from bmc, steering shaft etc.
Even with the fitment problems I would recommend it to others as the closest "name brand" manifold is at least twice as much $, but like in anything else in life, you get what you pay for.
Click to expand...



Hey Kyle,

Next time you have ANY issue like that call us immeadiately...I've sold over 200 of these, and I've only had 2 other people with an issue slightly similar, but it was only one of the holes.

Your case sounds a little extreme, I would've gladly sent you another, and i'm more than willing to throw you some store credit to compensate for the things you had to do to make that fit.

I'm sorry about that, but you, or anyone else, do NOT hesitate to call us if you have an issue, we're trying to help ISIS grow, so we're willing to work with anyone in any situation like this.

typeXblacktop said:
ok black guy what can u tell me about this fitment issue with the manni on sr's?
Click to expand...
If im not mistaken, they are drill pressed by hand, so 3 out of 200+ isn't too bad, but we're trying to get it down to 0 mistakes. But like I said, have an issue, call us, we'll take care of you...
 
Last edited:
BlackGuy said:
Hey Kyle,

Next time you have ANY issue like that call us immeadiately...I've sold over 200 of these, and I've only had 2 other people with an issue slightly similar, but it was only one of the holes.

Your case sounds a little extreme, I would've gladly sent you another, and i'm more than willing to throw you some store credit to compensate for the things you had to do to make that fit.

I'm sorry about that, but you, or anyone else, do NOT hesitate to call us if you have an issue, we're trying to help ISIS grow, so we're willing to work with anyone in any situation like this.


If im not mistaken, they are drill pressed by hand, so 3 out of 200+ isn't too bad, but we're trying to get it down to 0 mistakes. But like I said, have an issue, call us, we'll take care of you...
Click to expand...


Thanks for the heads up BlackGuy. I knew you would have taken care of me had I called but this was on a saturday and I just wanted to get shit done. It didn't look like it was off that much so I opted to grind a little here and a little there. By the time everything was said and done I ended up having to move every hole over.

All in all it was not that big a deal, just a little annoying when I had so much to work on that day.

Thank you for the offer to compensate my time, that is really a testimate to how awesome Enjuku is at customer service and why I will continue to buy parts from you in the future, however it is not neccessary. I look at it as an acceptable trade off for a $300 savings over a comparable manifold. After everything was said and done I would still recommend this part to other people. Tough to beat for the performance to dollar ratio.
 
thats wild.
When I put mine on it fit awesome. Super awesome fitment everywhere.
I got a megan 02 housing and that thing fit like shit.
 
my stock manifold fits like a charm. of course, i bought it from Enjuku too :bigthumbu

one day i will get off this stock fetish.

:ugh:
/kicks a rock down the alley.
 
my 2 cents. i dont mind doing research so i will buy the cheapest shit that has good reviews; brand name or not.
 
BlackGuy said:
Hey Kyle,

Next time you have ANY issue like that call us immeadiately...I've sold over 200 of these, and I've only had 2 other people with an issue slightly similar, but it was only one of the holes.

Your case sounds a little extreme, I would've gladly sent you another, and i'm more than willing to throw you some store credit to compensate for the things you had to do to make that fit.

I'm sorry about that, but you, or anyone else, do NOT hesitate to call us if you have an issue, we're trying to help ISIS grow, so we're willing to work with anyone in any situation like this.


If im not mistaken, they are drill pressed by hand, so 3 out of 200+ isn't too bad, but we're trying to get it down to 0 mistakes. But like I said, have an issue, call us, we'll take care of you...
Click to expand...

im sold...
 
kleen555 said:
Thanks for the heads up BlackGuy. I knew you would have taken care of me had I called but this was on a saturday and I just wanted to get shit done. It didn't look like it was off that much so I opted to grind a little here and a little there. By the time everything was said and done I ended up having to move every hole over.

All in all it was not that big a deal, just a little annoying when I had so much to work on that day.

Thank you for the offer to compensate my time, that is really a testimate to how awesome Enjuku is at customer service and why I will continue to buy parts from you in the future, however it is not neccessary. I look at it as an acceptable trade off for a $300 savings over a comparable manifold. After everything was said and done I would still recommend this part to other people. Tough to beat for the performance to dollar ratio.
Click to expand...
Awesome, we appreciate the honesty, and we're here to help. Let me know whenever you need anything else bud.

Bearcat said:
thats wild.
When I put mine on it fit awesome. Super awesome fitment everywhere.
I got a megan 02 housing and that thing fit like shit.
Click to expand...
I can think of about 5 different occassions where I had to send megan O2 housings and downpipes back in trade for ISIS...Just sayin'
boxmod said:
my stock manifold fits like a charm. of course, i bought it from Enjuku too :bigthumbu

one day i will get off this stock fetish.

:ugh:
/kicks a rock down the alley.
Click to expand...
Oh boxy, lemme know if you decide you want to run some ISIS stuff, i'll give you a hook up JUST TO GET YOU AWAY FROM BEING STOCK haha!

JoshuaS said:
<Tomei
Click to expand...
Yea man, I love paying 1000$ for injectors. And 900$ for an OEM throttle body with some adapter plates
hhn2002 said:
my 2 cents. i dont mind doing research so i will buy the cheapest shit that has good reviews; brand name or not.
Click to expand...
:D
typeXblacktop said:
im sold...
Click to expand...
:bigthumbu
 
Hey Blackguy, what do you think about the suspension arms?
i was thinking about ordering the circuit sports package from you guys..

would you recommend the isis instead? PM me
 
kleen555 said:
Thank you for the offer to compensate my time, that is really a testimate to how awesome Enjuku is at customer service and why I will continue to buy parts from you in the future, however it is not neccessary. I look at it as an acceptable trade off for a $300 savings over a comparable manifold. After everything was said and done I would still recommend this part to other people. Tough to beat for the performance to dollar ratio.
Click to expand...

^Done^

What mani did you get if you dont mind me asking?
 
booster seat said:
Hey Blackguy, what do you think about the suspension arms?
i was thinking about ordering the circuit sports package from you guys..

would you recommend the isis instead? PM me
Click to expand...
I'll PM you
hhn2002 said:
so your a blackguy that likes emo girls. interesting...
Click to expand...
Are you saying you wouldn't smash? You might want to rethink your sexuality....
7435543533a8289539078ml.jpg

kinda nsfw
http://img146.imageshack.us/img146/3552/danpat5mh7.jpg

madk180sx said:
^Done^

What mani did you get if you dont mind me asking?
Click to expand...
It was an ISIS exhaust manifold.
 
Status
Not open for further replies.
Back
Top Bottom