Water sucks

TurtleS14

Spectator
So recently ive noticed water leaks in my car.

comes from under that little black mat that runs up against the fire wall on the passenger side behind the ecu.

I took the fender off and its actually leaking from inside the body of the car (the frame rail behind the fender)..anyone know what this could be?
 
I have both but its not from that because i use a hose to try to track where the water is coming from. I thought of that but its an actually leak from the exterior
 
yup

it leaked from the pass. window, and the sunroof. Fixed both of those but now i noticed water is coming in from the front. I know where its coming from over all but not exactly how its getting into the car.
 
Last edited:
I just got a new windshield put in, and the old one was inspected and had no leaks. Also i personally watched them put the new one in and there is no way the windshield could leak. plus i got water bottles and found out that it only leak in the car when i pour water into some of the openings under the black plastic piece that goes there the wipers are.
 
Thts what im thinking i just dont know how to actually get there to see it because everything is all solid metal, and i dont want to just spray that somewhere without knowing where its going then water will get there and just sit, and sitting water is no good..
 
the sunroof should have a drain tube, and i dont know on the s14 but on the s13 it runs down right by the ecu, maybe yours is broken
 
it could be the seal around the fan motor , it has a gasket that is between the motor assembly and that tub under the black plastic under the hood/windshield........ it alo should be draining to the sides down some holes that go to under your fenders

take wipers off, take hood off, remove that plastic piece carefully, put some gloves on and remve all those dried up leaves you have in there clean it out good , then pour water in there and see if it flows out easily
if you want you can take your dash off and the dash bar, then take apart the a/c system (air box, heater core box) the heater box wich is the middle piece first then you can remove the fan unit in the far right corner..... once thats out you can see the opening that sucks air from outside, get that black seal goop that is used to seal the tail lights or the windshield and put it over the shitty foam factory gasket that probably dry and crumbally and reassemble everything
a good days work if you start early and dont break nothing
 
Back
Top Bottom