vacuum stuff on an SR

[HellaCaliJosh]

So i just redid the way most of my stuff was run and want to know what other people are doing.

I have the Wastegate running to my boost controller then to a barb i installed in the coupler coming off the turbo.

The BOV i ran over to intake mani by way of a 3-way that goes to my FPR.

The boost gauge i have running off of a curved nipple on the bottom of the throttle body. This is the one i'm confused about any other place i should be reading from?

 

[hhn2002]

you can read from my nipple

 

[FlyinFINN]

"Technically" You should have seperate vacuum lines for each of those but you should be fine. Idk what the nipple on the bottom of the TB connects to but you should just be reading post TB pressure.

 

[robertftw]

The nipple on the bottom goes to the charcoal canister, my boost gauge is on the nipple next to the one for FPR (also for charcoal canister), Don't know if it would read different.

 

[FlyinFINN]

Lol. Don't hook it to a charcoal canister (if thats what your saying).

 

[HellaCaliJosh]

i think he's saying where the charcoal canister goes to. not to the canister...which would be impossible anyway since i don't have one.

 

[FlyinFINN]

As long as it's a direct vacuum to Post TB then your fine.

 

[robertftw]

yeah i meant at the tb, lol.