Sr20det cas timing question.

[e30 gangsta]

Do you guys always set it up to 15 degrees below tdc? or do you guys sometimes run a bit more or less depending on the psi. please let me know guys. thanks.

 

[Tonymac]

I always set it at 15* btdc.

 

[robertftw]

I always set it at 15* btdc.

+1

 

[HellaSFLDan]

what is a cas?

 

[z4k]

15* BTDC. The ECU can adjust timing to compensate for A/F Ratio, More Boost, Etc..

 

[boostedwhiteS14]

+1 keep it at 15 deg btdc the comp will do the rest

 

[e30 gangsta]

alright so i have it all figured out. Its the 2nd to last mark that is 15* btdc. My question is that from the right side or left side of the crank pulley?

 

[Drft_Lock]

the good old timing. man how i hated it. but here ya go! http://www.plmsdevelopments.com/sr_setup_tips.shtml#3.fpr