sr20 weird spark issue!!

bearsblack

bearsblack

Drifter & 4um Junkie
Driver
just adjusted my timing by frsports write up- http://www.frsport.com/How-To-Set-Crank-Angle-Sensor--CAS--Timing-on-the-SR20DET-Engine_t_25.html , and im only getting spark off of the first plug. ive moved my coilpacks around to each plug, and still only the first one works.. could this be a coil pack harness problem?? and its wierd because i checked with a volt meter, and i was only getting like 1/10 volt from the first plug, and same with 2 and 4, but #3 had 11-12 volts.. AND im getting 10-11 volts to the power on the plug that goes into the coilpakc harness.. fucking japs...
 
checked, and its all good. ive got ecu code 21- ignition signal

i although i wired the engine harness directly to the chassis harness, i wired the big black/red and big blue/red and brown all to the big black/red from the chassis.. idk why it would be giving that code.. and ive got 12 volts to the harness and every positive pin on the coil pack harness, but when i go to crank it an check for coil pack pulse, im getting less than 1 volt..
 
swap ecu for another one the coil driver i believe is in the ecu if i remember

no first check signals in and out of igniter
 
Last edited:
yea, im not getting anything off the ignitor. and moe said he thinks he may have sent me a type x harness!! so im hoping hes gonna send me the correct ecu sometime soon...

thanks though man, ill keep this posted, hopefully my car will be mobile by next weekend..
 
You must log in or register to reply here.
Back
Top Bottom