smoke and oil coming from turbo

kennyS13

Spectator
i just started up my ka-t today and white smoke was pooring all over the place,the turbo was rebuilt so it has 0 miles on it.could it be possible to have to much oil pressuring running to the turbo causing it to leak?what do i need for this to stop..its white smoke..i asked around and i keep hearing that my oil feed inlet seals are bad,too much oil pressure...the car starts up fine but once i get on the throttle white smoke just poors out..please help
 
either valve seals, you didnt prime the turbo and blew the seals, or somone lied when the rebuilt it, you could have to much oil pressure
 
http://www.aa1car.com/library/turbo_repair.htm
Some of the things that should always be done after rebuilding or replacing a turbo include changing the oil and oil filter, checking the air filtration system for leaks or obstructions, and priming the turbo oil supply before starting the engine. Cranking the engine for 10 to 15 seconds with the ignition coil disabled will pump oil to the turbo. Observing these simple precautions can make the difference between a successful repair and the embarrassment of making a second trip to the parts store.
 
do u have oil restrictors?

and the turbo was rebuilt by a smart dood. I'm sure ur missing oil restrictors.
 
Back
Top Bottom