S15 r200H diff question!

[KoukiMunsta]

Whats up guys!? i was hoping someone could hook me up with good information regarding my technical question! i have an S15 R200H diff. i am looking to replace my final drive gear to 4.083! you guys think the KA24de final drive which is 4.083 fit my r200h? or does anyone know a site that have r200h diff gear set up grades? i know the none turbo s15 r200h diff comes with a 4.083 but i cannot find it available anywhere! who has better Google skills then i do? this diff will be mated with a 350z manual trans. :bigthumbu

 

[KoukiMunsta]

i am the only one without an answer?

 

[El Abe]

Go on NICO

 

[axle954]

Get q45 ring n pinion, 4.08 is gay with a 350z tranny

 

[KoukiMunsta]

Get q45 ring n pinion, 4.08 is gay with a 350z tranny

I don't drift fool, Time attack

 

[IThaJokaI]

Yes, you can use any r200 ring and pinion.

 

[axle954]

Doesnt matter if u drift or not fool.
1st will be useless if u use the 4.08 with a 350z tranny

 

[carcrazee]

well this is sfl drifters not sfl time attakers

 

[MKIII305]

>Doesn't drift
>On drift forum asking for answers
>wut

 

[IThaJokaI]

Doesnt matter if u drift or not fool.
1st will be useless if u use the 4.08 with a 350z tranny

Most of the SR20 guys using z33 transmissions are running 4.36 or 4.63, lol.

 

[axle954]

I run one an with the stock diff 1st gear went to 10mph

 

[slide-ways-for-five-days]

fyi, not all r200 ring gears will work.

some are held on with a 11mm bolts and some with 13mm.

 

[IThaJokaI]

The ring gear is hubcentric? it aligns with the center of the diff, I have seen people use 4.08 r200 ring gears with the factory open diff bolts.

I have also seen some people use any r200 ring, with the holes bored out.