s13 wheel wobble need help thanks
- Thread starter santi5222
- Start date
Albert
Driver
side to side..then thats the control arms or the inner tie rod, most likely. if it moves up and down and side to side then its the wheel bearing.
thats what would be the first things i check, and its real easy dont let it get any worse or u'll could find ur self driving on 3 wheels!
boxmod
Driver
usually not but sometimes you can jamb a bunch of weight on it. if you have more than like 1.5 weight thats pretty big (steelies right?) but bent you'd see like 3+ prolly on there.
my truck used to have a wobble similar to this (so did my daily 240 back in the day). truck was simply the weights were not done right, they didnt lock the wheel on the machine "flush". my 240 i think was also a weight problem one time, and a loose lug another. never had anything major cause it.
metalrocks12
Driver
tension rods:bigthumbu see if the bushing is falling apart. jack up the front and try to pull/push on the wheel front and back. if its got play that might be an issue
Albert
Driver
exactly just simply jack the front end up and check for play..that will tell ya wants going on.
santi5222
Spectator
I changed the bushing in the front except the rack bushings.
---------- Post added at 06:20 PM ---------- Previous post was at 09:08 AM ----------
update I swaped out the rim on the driver side cuz it was bent an the car feels a whole lot better but it still shakes a bit but u feel it more when u off the gas.
---------- Post added at 06:20 PM ---------- Previous post was at 09:08 AM ----------
update I swaped out the rim on the driver side cuz it was bent an the car feels a whole lot better but it still shakes a bit but u feel it more when u off the gas.