S13-J30 Brake Upgrade question

thanks brah... i did a little more research and found that there will be a clearance problem with the z32

but not with the q45/j30 's How true is this????
 
Last edited:
Zenki S13 said:
found that there will be a clearance problem with the z32

but not with the q45/j30 's How true is this????
Click to expand...


thats true.. most people do j30/q45 over z32 because its easier to find wheels that will clear the caliper without the use of spacers and extended studs
 
okay , just so there's no communication issues. if i have the caliper, rotor, and pads, i could simply redrill the rotor and install without using spacers and extended lugs while maintaining the stock steelies, correct?
 
the only thing that doesn't clear are steelies like diamond racing wheels when you use a 23mm g20 rotor, but then I don't know if the q45 rotor is a full 28mm thick around the stud holes?

stock wheels, your good.
 
the only 240sx se wheels that will clear without spacers are s14 se wheels

the different type of s13 se wheels need a 5mm spacer and the other type of s13 se need 20mm because ive done all 3 and tried them all
 
You must log in or register to reply here.
Back
Top Bottom