running hot

KeysSr

Driver
s13 with sr cx rad its running hot like 200 and 210 with ac on. the sensor is on the outlet of the cooling systm by the cas (top rad hose)
ps this is running on the high way
 
might be a blown head gasket. my friend has that radiator :rolleyes: for being so cheap it's not that bad. he doesn't even run fans right now, it never goes over half way unless you've been drifting non stop for like 20 mins.
 
put in a new head gasket like a month ago and shaved the head

bump i need help
 
Last edited:
make sure all the fins on the condenser are straight..
if they are bent up then it will reduce airflow

also do you have a front mount?
what kind?
i use to over heat because the intercooler was too far away from the rad causing poor airflow
 
-You could get a cooling plate to keep airflow going throught your rad. Also try a KA thermostat. Is your bumper cut out at all for the FMIC?
 
has ka trermostat it runs hot all the time new head gaskit, arp head studs and torqued to specs. and yes i cut the bumper to fit the front mount
were can i get a cooling plate
 
Back
Top Bottom