oil return???

B

bluesguy321

Member
The t25 oil return to the bottom of the block almost next to the down pipe.(?) and the t28 in the same place but not the same size. t25 is a larger, wider bolt pattern. Where as the t28 is narrower bolt patteren. Any one know where I could get one? Or who is/can selling one??
 
You ask some confusing questions! What exactly do you need? An oil return line for a T28? If your turbo didn't come with one, I'm not sure where you can get one. You might have to get the taka turbo line kit. Enjuku, phase2motortrend, and pretty much every other SR parts distributor sells the kit.
 
dori dori said:
You ask some confusing questions! What exactly do you need? An oil return line for a T28? If your turbo didn't come with one, I'm not sure where you can get one. You might have to get the taka turbo line kit. Enjuku, phase2motortrend, and pretty much every other SR parts distributor sells the kit.
Click to expand...


not trying to be confusing. I ordered the Taka lines. But there is one that goes to the bottom of the block.

you have holes on the compressor side. one for coolant in and return, one for oil in. the 4th is on the bottom of the turbo, picture it on the car, as the oil out. but it is not a hose. it is a fitting that bolts on to the turbo with a tube sticking out pointing toward another tube joined by a oil hose. That is the piece I am talking about. Can I buy it from someone, cause the t25 piece dose not bolt up to it.
 
Last edited:
Ah, you need an oil drain flange.

I'm not sure which one will fit on. Try visiting a turbo sales/repair shot like MIC turbo (hialeah).

- oh and bring ur turbo
 
No problem.

Out of curiosity, are the bolts just not lining up?

Also, don't forget to get a gasket when you buy that flange.
 
dori dori said:
No problem.

Out of curiosity, are the bolts just not lining up?

Also, don't forget to get a gasket when you buy that flange.
Click to expand...


bolts are not lining up, and I also need a gasket. movin the hole over are you thinking?
 
No, just wondering how it didn't fit. I would have thought they'd be the same. MIC should have both parts that you need. If you knew what you needed you could order it from www.atpturbo.com or something.
 
You must log in or register to reply here.
Back
Top Bottom