Need of another all data favor

M

MarcoJDM

Driver
Hey guys! Looking to see if I can get the directions for the rear hub removal on a 92 Lexus sc400

This hub has been kicking my as to say the least. I have all the arms disconnected. All that's connected to the hub is the axle which will rotate left to right but will not pull off no matter what I do.

I've used a hammer, wd40 and liquid wrench to try and loosen it up, and we used a hub puller and it got tight and broke the puller lol.

I was thinking there is a snap ring or something keeping the axle tight? I'm stuck. Any input is appreciated. If anyone has those schematics I will be extremely grateful!

Thanks fellas! This car is almost complete! Just needs some little things buttoned up!
 
Heat up the axle/hub place a piece of wood on the axle hit it up with a hammer
 
First ur hub puller is shit if it broke, n ders no snap ring, the axle is seized in the hub. Use hrat and a bigger hammer or air chizle with a pointed nose. Make sure not to mess da threads up or mushroom the,axle end or ull be lookn for ola new one of them too
 
So I should put a torch to it and try and bang it loose?
I'll try and do that next time I'm out there!
Thanks fellas. I have seriously never had this much trouble on anything before. Lol
 
There is no snap ring. So you kno I put a torch to it for about a minute. Let it soak in pb blaster shortly after and used a different hub puller and it put up a fight but finally popped loose.

Now I just gotta get that bearing changed and I should be good to go

Thanks guys!
 
You must log in or register to reply here.
Back
Top Bottom