Metalrocks12 welding capabilities!!!

Status
Not open for further replies.
J

jimmybahh

Driver
I've known this kid for a while and this kid is freakin awesome. He always hooks it up and he's always a man of his word.

Here's a few things I had welded by him

my diff. Pbm style
175d9f80.jpg

a25fe1db.jpg


my exhaust
a0f24347.jpg


he always takes his time and makes sure that everything comes out better the perfect


If you guys need anything welded he's the guy to go to.


Thanks again Roberto
 
nice... cant believe u guys waste ur time taking the diff apart to weld it... its a welded diff

either way good stuff
 
well its not that i dont want to its that i like to be super clean u know, if you weld it from the outside your allways gona have pieces of welds that fall in an destroy the diff

i acctualy had one diff that i had to reweld after some one had done a shity job of welding it with a bad welder, i put welds on top of the old ones and tried to get most of the metal out but the owner told me he couldnt wait so i did a half as job and it only lasted 4 months.... from now on im only doing it like this cus i dont like looking bad even if it wasent my work that caused the problem i dont wana be on the spot like that
 
I've been on the same welded diff for the past like 2 years. Been through 400whp sr, Micky Thompson slicks, brand new pontenza 275's on high boost for like 3 events, maxxis ma-z1 drifts, a t25 setup that I clutch kicked like an meffer, and now a damn ls1.... And that same diff is still rockin! Welded it in the case and everything. Wordddddd.

Not trying to say yours are crap or anything, cause they look sick as shit..... But fuck, that's alot of damn work for a welded diff.
 
Last edited:
Bearcat said:
I've been on the same welded diff for the past like 2 years. Been through 400whp sr, Micky Thompson slicks, brand new pontenza 275's on high boost for like 3 events, maxxis ma-z1 drifts, a t25 setup that I clutch kicked like an meffer, and now a damn ls1.... And that same diff is still rockin! Welded it in the case and everything. Wordddddd.

Not trying to say yours are crap or anything, cause they look sick as shit..... But fuck, that's alot of damn work for a welded diff.
Click to expand...

It is but that's y he is doing it to help others out on good quailty work and very good prices
 
^ tell me about it i learned that the hard way on my diff for my z.... that was a fun 15 min trying to shave off 2mm on metal that it would go in all the way lol i got a new way worked out that will prevent it tho

how u liking the brake cylinder bill??

and bear cat im guessing yours isent done like this and i agree its alot but knowing that it will never EVER break is kinda nice, i just dont wana do what everyone out thier does and weld it with 2 screws and a gas less welder. im making legit shit now cus i wnt you all to see i know what im doing, at the moment i got solid mounts for s14 and z32 diffs in the making and im about to do my first angle mod on aluminum knuckles(aluminum sucks balls) and i can do steel ones at the moment but wana do mine and ride them for a while before i say i can weld alum knuckles


just tryin to help the sport out guys :)
 
metalrocks12 said:
^ tell me about it i learned that the hard way on my diff for my z.... that was a fun 15 min trying to shave off 2mm on metal that it would go in all the way lol i got a new way worked out that will prevent it tho

how u liking the brake cylinder bill??

and bear cat im guessing yours isent done like this and i agree its alot but knowing that it will never EVER break is kinda nice, i just dont wana do what everyone out thier does and weld it with 2 screws and a gas less welder. im making legit shit now cus i wnt you all to see i know what im doing, at the moment i got solid mounts for s14 and z32 diffs in the making and im about to do my first angle mod on aluminum knuckles(aluminum sucks balls) and i can do steel ones at the moment but wana do mine and ride them for a while before i say i can weld alum knuckles


just tryin to help the sport out guys :)
Click to expand...

Bro, chill. Haha. Your shit looks nice. I'm just saying for a welded diff, that's a bit much to pull everything out. My diff was left in, and it worked out great. My bud did it with a super nice miller big dog mig and knows what he's doing, so it'll hold. We're welding a new one up this week cause we're tired of going to every event and worrying the whole day about it breaking. Haha.

Oh, and it's a welded diff, it will break eventually somehow.
 
Last edited:
bear good luck and yea lol if you keep it clean tho they last for a while, also a light shim helps to get them from clicking and spreading out the torque


np bill just next time i see ya i get a ride :)
 
metalrocks12 said:
bear good luck and yea lol if you keep it clean tho they last for a while, also a light shim helps to get them from clicking and spreading out the torque


np bill just next time i see ya i get a ride :)
Click to expand...

Yeah, I really don't care about sounds. Everything else is so noisy it doesn't matter.
 
Status
Not open for further replies.
Back
Top Bottom