mechanic services cheap.

M

miami-200sx

*Reinstated drifter*
Driver
hey people, just letting everyone know, if you need something done to your car i can do it for cheap. i need money desperately due to unemployment.

here is a lil list to give an idea.

-cluth swap= $100
-engine swap =$150
-ka24e to ka24de wiring =$30
-ka to sr20 wiring = $50
-striping interiors, prep work (depends.)
- ligh body work (depends)
-diff swap= $40
-egr remuval=$30
-normal maintenance (water pump, radiator, gaskets, suspencion parts)=$
$15-30

i dont have a shop but i can find places if needed, i got all the tools except the cherry picker (engine hoist).

all prices are as is, without driving fee, if you live in wpb ill charge you for the gas.

anyone interested please lmk.

sergio ochoa
786 277 1339.
 
Rytakahashi001 said:
sounds pretty good. do you know anybody that can vouch for you? i might have some work.
Click to expand...

Dont waste your money on letting this guy work on your car. He sold me a j30 hicas diff a while back ago. charged me for install and half assed the installation. didn't use lock-tite on the diff bolts and all the bolts for the axles came loose causing me some trouble for nothing. and to top it all off, he later took the liberty to make comments on how he hoped that the damage would have been worse just because i coincidentaly bought some super advan steelies that resembled his. miami-200sx ftl!
 
Last edited:
MA70witBoost said:
Dont waste your money on letting this guy work on your car. He sold me a j30 hicas diff a while back ago. charged me for install and half assed the installation. didn't use lock-tite on the diff bolts and all the bolts for the axles came loose causing me some trouble for nothing. and to top it all off, he later took the liberty to make comments on how he hoped that the damage would have been worse just because i coincidentaly bought some super advan steelies that resembled his. miami-200sx ftl!
Click to expand...

LISTEN PIWEE!!!! that was way back then, and thats cus ur a douch! and a cheap ass. what would you expect from a j30 installed for 150. pfft.....
and i did everything right. is not my fault the shit came loose. i never use bolt lock or w.e cus u dont need em..... thats why there is washers.....
:rolleyes:


i know a couple of people that can bouch for my work. but i gota contact them.


BY FAR the BEST contact that i can think off. is JUAN HENAO ima have him post in here,

i just swaped his engine last 2 weeks ago in his dayli, and ive done suspencion. and i did his Roll cage.

other people that can bouch for me are.

madngineer
RuLeSoFiNeRTiA
jdmnismo300
Juan Henao
Obi Juan, AKA xero240
WannaBDrifter
Hanz
 
I can vouch for this man. He does very good work and deserves a lot more than those crackhead prices he posted.

I guarantee that anyone who gets any work done by Sergio wont be disappointed.:bigthumbu

BTW. It's "wannabdrifter" I posted under the wrong name. Sorry.
 
Last edited by a moderator:
miami-200sx said:
LISTEN PIWEE!!!! that was way back then, and thats cus ur a douch! and a cheap ass. what would you expect from a j30 installed for 150. pfft.....
and i did everything right. is not my fault the shit came loose. i never use bolt lock or w.e cus u dont need em..... thats why there is washers.....
:rolleyes:
Click to expand...

Way back then doesn't change the fact that it happened. And how am I the cheap ass? You offered the diff for 150 and offered to install. how is that on me? I see you still aren't smart enough to admit your mistake so you resort to talking shit about people.

and by the way, you contradicted yourself when you said you did everything right... if you woulda done it all right it wouldn't have come loose.
 
Last edited:
dan said:
dont blame ur lack of subframe bushings on sergio
Click to expand...

Dan, have you seen my subframe? were you there to vouche for Sergio's installation of the differential?

Besides, thats not my issue. Its that ontop of the poor service, he runs his mouth talking shit saying that he hopes I wreck my car just because I bought a pair of steelies with gold twin 3 spokes (super advan) painted on them from Suaknee. saying i was jocking his shit. I woulda hoped that he woulda matured a bit but seeing him run his mouth just proves some people never change. You people trust him with your money... I sure as hell wont make that mistake again.
 
Last edited:
^ Jocking your shit? Its a 240sx. Everyone is jocking everyones shit if you own a 240. ( no homo )

You drive a 240sx. Nothing new or original anymore.

who cares?
 
It sucks that my first post here is in a flaming thread but here are my two cents wether you like it or not.

1)It's messed up that when the guy is trying to DESPERATELY make a buck you pick an argument based on the fact he runs his mouth. If he did a bad job on your car just let everyone know and that's enough of a warning but don't let your petty grudge stop someone from making a living.

2)As far as the mechanic dude is concerned well how can you say that you get what you expect from a $150 dollar swap and then think people will feel comfortable with the cheap prizes you are giving on the work you offer? Makes no sense dude!

The prizes are cheap and people vouch for this dude so my opinion is that as part of the 240 community and the drifting community we should all help each other out and that as a mechanic, you can make a name based on your work and if you keep a professional attitude then people here will be happy to vouch for you and who knows where that may lead

Peace out!
 
Last edited:
I vouch for him my car runs thanks to him ... I have gotten tons of work from and he's fought me a ton about my car .... I have a diff installed by him Been on for a year now still locks .... Just got clutch done works like a charm ... He hated leaving something un done .... Attention to detail is crazy .... Wired tons if cars and swapped like 5 motors .... Plus he can drive ... U need something done he's. Your man ...

All typos brought to u by my iPhone
 
Last edited:
true i know, but the guy is just a cry baby, shit happens, one time my axle came loose and broke. no one is to blame, thats life.
but w.e

Trust me or not.
i know what i can and cant do.
and i can certanly do all the work posted.


here is a lil example.
my car was a piece of shit shell.....
and after 24 hours of work.


took out old blown bag. cleaned and preped and painted,
nancy623.jpg


then swaped and wired..
nancy661.jpg


this is b4 stock.
salell005.jpg


now custom zenki front.
DSC_0464.jpg





thats just to give you an idea, :bigthumbu

RuLeSoFiNeRTiA said:
All typos brought to u by my iPhone
Click to expand...

lol tanks men, :D
 
Last edited:
MA70witBoost said:
didn't use lock-tite on the diff bolts and all the bolts for the axles came loose causing me some trouble for nothing.
Click to expand...
well i can see you know nothing about cars?
your not supposed to use lock-tite on the diff bolts..they make this awesome little washer thats called a locking washer,nissan puts it on there for a reason, TO LOCK THE BOLT ON
so you dont need to use lock-tite

i have installed like 8 differentials and never once used lock-tite also never once had a single problem with any of them

sergio is a cool guy!
bump for the fact that he is trying to do whatever is needed to make some money
 
You must log in or register to reply here.
Back
Top Bottom