Jackson Performance Solid Steering Bushing

Hey chris you gonna make it to the April 18'th event?
I might pick one up from you, I'll talk to my shop.
You also ship right?
 
ok sry instructions are all sold out also. its simple though
1put car on jackstands
2 mark the steering linkage
3 remove the 2 12mm bolts that hold the linkage on
4 follow the linkage up to the firewall and remove the 2 12mm nuts
5 remove shaft
6remove 2 more 12mm nuts
7 install solid bushing
8 put back together
 
i think i will be picking one of these up next week. I still have a little bit of play in my steering wheel (about 10 degrees)

I replaced
-inner and outer tie rods (tein
-tension rods (megan)
-FLCA (with new ball joints and bushings)
-sway bar end links (energy)
-steering rack bushigns (energy)

im guessing this is the only thing left? other than the bushings that surround the sway bars, which i doubt would give me steering wheel play
 
ok i must be crazy because i took out my steering shaft and is a solid piece it has a non detachable U joint and thats it. that bushing is nowhere.lol
is a 96 s14

even the ones on ebay are just for s13's im i missing something?
 
Last edited:
miami-200sx said:
ok i must be crazy because i took out my steering shaft and is a solid piece it has a non detachable U joint and thats it. that bushing is nowhere.lol
is a 96 s14

even the ones on ebay are just for s13's im i missing something?
Click to expand...

mega fail... do ur research next time
 
You must log in or register to reply here.
Back
Top Bottom