Injector question...

xxnismoxx

xxnismoxx

Spectator
So im buying some injectors for my dohc ka24 for my s14, its dsm 450cc injectors...will these work? from what i researched, i'll need an aftermarket fuel rail and a resistor box..but im still lost. do i need a high capacity or w.e...im lost at that part lol. any help would be great
thanks!
 
10watt 10ohm inline resistors or a resistor box from a honda. as far as the fuel rail i think dohc ka have side feed injectors so you'll either need to get a new fuel rail to accommodate the top feed dsm or get some sr20 370 side feeds that should work with you stock fuel rail
 
So is it even worth it to go with the dsm? I'm gettin it for 35 bucks shipped. I'm going turbo on my ka, its a t28 so will the sr injectors be enough to get all hp I can get?
 
sr would be the best bet for you since your DOHC if you were SOHC you would need top feed injectors and in that case the dsm would be perfect... im sohc is boosted 7psi with a t3/t4 hybrid on stock injectors and it runs fine just need to adjust the fuel with a SAFC. i have some 670cc top feed that im not using.
 
You must log in or register to reply here.
Back
Top Bottom