hydrolic e brake setup?

aaaaaaaaaaaaaaaaaaaaaaaaaaaarrrrrrrrrrrgh!!! ok, this is getting really frustrating. do yourself a favor, box it back up and send it back.
 
i didnt get the piece yet i was just looking for some info.... i thought this was a site to get info and hows to's.... IF i keep getting bullshit from people there no reason to be on here.

thanks everyone!
 
anthony713 said:
i didnt get the piece yet i was just looking for some info.... i thought this was a site to get info and hows to's.... IF i keep getting bullshit from people there no reason to be on here.

thanks everyone!
Click to expand...

Nobody's giving you bullshit.

You need to work with us if you want us to work with you. That starts by at least TRYING to look up some info on what you're getting so you can THINK about it yourself before posting.

You get a slave cylinder. The cylinder goes inline of your rear brake line. If you've never worked with brake lines before, you won't understand what im saying, but you'll have to flare your lines. As for mounting the handle, you're gonna need to make a bracket or have someone make you a bracket. Its all straightforward but will require some knowledge and skill to make it happen. If you're this clueless, Im guessing you don't have that knowledge. In which case, contact a shop and have them do it. I recommend harri at Ter-Tech if he'll take the job.

Oh and don't fuck with the handle while there's no fluid in it or you'll ruin the cylinder.
 
Tonymac said:
Nobody's giving you bullshit.

You need to work with us if you want us to work with you. That starts by at least TRYING to look up some info on what you're getting so you can THINK about it yourself before posting.
Click to expand...

yeah!
 
there is a hole in your fire wall for the A/C to drain through.

run your lines through there to the union on the right frame rail on the other side of your fire wall. run one line to the union and one line to the hard line.

which kind of hand brake did you buy or are buying

poweredbymax comes with Earls SS lines and K sport offers a SS line kit. That way you don't have to bend your own lines or flare them. doing it yourself with hard lines is cheaper.
 
JoshuaS said:
there is a hole in your fire wall for the A/C to drain through.

run your lines through there to the union on the right frame rail on the other side of your fire wall. run one line to the union and one line to the hard line.

which kind of hand brake did you buy or are buying

poweredbymax comes with Earls SS lines and K sport offers a SS line kit. That way you don't have to bend your own lines or flare them. doing it yourself with hard lines is cheaper.
Click to expand...

Thanks for your help bro... ill check both them out. I wanted the k sport one but not sure.

THanks again

-Anthony
 
Do you need a hydraulic handbrake?

A good working 240SX handbrake functions the same, it actuates the same pads just with a cable instead.

I would recommend other things first
 
anthony713 said:
Thanks for your help bro... ill check both them out. I wanted the k sport one but not sure.

THanks again

-Anthony
Click to expand...


Sean is right about the "do you need a handbrake" if you a beginner you most likely won't need a hydraulic one. If yours doesn't work in the S13 it most likely needs adjustment and better pads. If i was you i'd put the money towards other things.
 
1. Install the Hydro E-brake in a location that comforts you.
2. Run through a hole/ make your own hole in the fire wall.
3. Run the lines through the firewall.
4. Install it on to the brake master cylinder.
5. Test it out.
6. And go be a fan boy.

Here is a more detailed installation guide.
http://www.gtfactory.jp/cms/page.php?4
 
effffffffff that.

if you post this thread, you do not need a hydro ebrake. thats word.

buy a drift button. put the money you saved into a piggy bank towards a useful mod.

also it is hydraulic.
 
Last edited:
Buriantsu said:
1. Install the Hydro E-brake in a location that comforts you.
2. Run through a hole/ make your own hole in the fire wall.
3. Run the lines through the firewall.
4. Install it on to the brake master cylinder.
5. Test it out.
6. And go be a fan boy.

Here is a more detailed installation guide.
http://www.gtfactory.jp/cms/page.php?4
Click to expand...

home girl that goes to the brake master on a RHD car. on a LHD car you run it to the union. Stop being a fan boy.
 
Sean Love said:
This thread makes me wonder and realize how things in the world got discovered and built in the first place
Click to expand...

ALIENS BRO!!!, just like the pyramids.

Sean Love said:
Do you need a hydraulic handbrake?

A good working 240SX handbrake functions the same, it actuates the same pads just with a cable instead.

I would recommend other things first
Click to expand...


sell me yours off my kouki monster.
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom