help with ka24de electrical

RADIR

RADIR

Driver
I'm doing a swap a '95 ka24de into an '89 S13.
I got the engine wireing harness that i got with the motor hooked up to the engine but there is no power going to the engine and fuel pump at all.No fuel,no spark.Where is the connection that gives power to the engine?
Need help ASAP!
Thanks!

I took a few pics of "extra" conectors i have on the car if anyone knows where these go let me know please
end of ka24de harness
039.jpg


these next to the battery
027.jpg


these are on the engine side of the firewall from the ka harness
034.jpg
 
Last edited:
are u serious! ur using the wrong harness. u need to use the s13 dohc harness. u need to swap upperintake minfold, distributor, maf, and ecu=-from the s13ka in order for the swap to work

this has been covered many times, u need to search!!!
 
the tranny dosnt matter. is just the harness, i can tell you 1st you need to splice and color match the engine harness to the underdash harness . then those plugs by ur battery need to go pluged. they control the power your talking about.

you need a twincam harness as far as i know. unless you color match wires and play with it till it works. ......

also make sure you have them blue relays by the battery.

and you need an s13 ecu. that looks like an s14 one.

just get the whole harness and ecu. piece of cake and call it a day...;)
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom