godspeed rucas

[sdeream]

got some godspeed rucas off a friend but their missing these little bushing things:

is there anyways to just get these little spacer things or wat could i do bout this?

 

[SKINNY D]

for being a dumbass

 

[Slide~Or~Die]

There not welded, its supr glue!

 

[Wolf Haley]

lol....starting 2010 off in style i see....failing at 200mph

 

[sdeream]

spd limiter cuts me off at 115mph so i guess im good with superglue?? lol no for real where can i get just that one piece

 

[FlyinFINN]

Just cut some metal to fit that size, done.

 

[D. Davaine]

no shane he cant do that those spacers have to fit in the end alittle bit. he will snap that bolt.

 

[SAS]

you should be able to order them from godspeed

 

[D. Davaine]

sas he is trying to tell me u cant u have to buy the whole end. thats bull shit. if they tell u that call godspeed themselves.

 

[FlyinFINN]

no shane he cant do that those spacers have to fit in the end alittle bit. he will snap that bolt.

I've seen 2 240's and a 300zx do it. It's fine.

 

[SAS]

sas he is trying to tell me u cant u have to buy the whole end. thats bull shit. if they tell u that call godspeed themselves.

i think thats bullshit but buy the whole end shit cant be that much its godspeed

 

[D. Davaine]

ya but juan is a broke ass nukka and he can work the street corner this week cause of the bumps

 

[FlyinFINN]

If your that worried just look up a Heim Joint manufacturer/supplier near you and ask for those spacers, very simple.

 

[Dr. Dooms]

If your that worried just look up a Heim Joint manufacturer/supplier near you and ask for those spacers, very simple.

that would be the correct way

 

[robertftw]

google heim joint spacers or rod end spacer, get yourself some calipers and start measuring, they are about $10 for each spacer so you will spend about $40 plus shipping. How much does godspeed want for new ends?

Here is a start http://www.midwestcontrol.com/catdisplay_short.php?pg=228

 

[S13<3]

google heim joint spacers or rod end spacer, get yourself some calipers and start measuring, they are about $10 for each spacer so you will spend about $40 plus shipping. How much does godspeed want for new ends?

Here is a start http://www.midwestcontrol.com/catdisplay_short.php?pg=228

this