ebrake help

Mr. Steef

Mr. Steef

^Chris Kastner^
Driver
Ok so my ebrake never really worked drifting wise. All its good for is parking the car. So I replaced all three cables and tightened it up.




no dice..



anyone having any ideas on how to get this damn thing working otherwise ill be building my own hydro
 
Just change mine today with old pads locks up low and high speed.

make sure the line are bolted to the sub frame.

Steef hit me up will tell you what today nukka!!!!
 
i have about a month and half old pads and fairly new pads. All only daily driven on. The cables arent bolted to the subframe i'll try that. i read another thing about seized calipers but i doubt thats my problem
 
See even with the cables bolted I doubt it will work because my old cables were bolted and it still didn't work
 
do new pads and rotors.

Mine like sorta works, but I gotta throw the car realll hard to initiate with it. While im in drift, it'll work just fine.
 
Bearcat said:
do new pads and rotors.

Mine like sorta works, but I gotta throw the car realll hard to initiate with it. While im in drift, it'll work just fine.
Click to expand...

thats the thing both pads and rotors are fairly new. I'll have to put the car on the lift and have someone pull the ebrake while i check both cams and the cables
 
Mr. Steef said:
thats the thing both pads and rotors are fairly new. I'll have to put the car on the lift and have someone pull the ebrake while i check both cams and the cables
Click to expand...

does it make any strange noises?
Mine started actin super shitty, and makin weird noises. It ended up that my rear spindles were loose and wobbllin a bit.

I have Hawk HP+ pads and advanced autoparts rotors. it literally did not work AT ALL when we put em on. Im talkin like pull my ebrake as high as I could and I could push the car fairly easily. did a burnout or two and pumped the ebrake some while doing it, and they started working.
 
Bearcat said:
does it make any strange noises?
Mine started actin super shitty, and makin weird noises. It ended up that my rear spindles were loose and wobbllin a bit.

I have Hawk HP+ pads and advanced autoparts rotors. it literally did not work AT ALL when we put em on. Im talkin like pull my ebrake as high as I could and I could push the car fairly easily. did a burnout or two and pumped the ebrake some while doing it, and they started working.
Click to expand...

nope doesnt make any noises besides the noise from pulling the handle. also i have advance rotors. i'll check the spindles aswell tomorrow. i mean with the ebrake cable tightened all the way i'll pull it while driving and all it does is slow the car down but doesnt lock up the rear
 
Mr. Steef said:
nope doesnt make any noises besides the noise from pulling the handle. also i have advance rotors. i'll check the spindles aswell tomorrow. i mean with the ebrake cable tightened all the way i'll pull it while driving and all it does is slow the car down but doesnt lock up the rear
Click to expand...

yeah, my car does the same thing. Just gotta throw your car realll hard on initiation or clutch kick.
 
You must log in or register to reply here.
Back
Top Bottom