DIY Drift Knobs???

[Dr. Dooms]

aight here are the pictures that i took for the " drift knob"

i pushed the button down and drilled right through the ebrake with a 1/8 drill bit.

same with the cover.

as for the pin to keep the button down I used a pin from a grenade.

that is awesome!!

 

[カラスVisionLabo]

yo thanks bro, you driving at countyline?

 

[slidewayz240sx]

Hahahaha i have to admit, thats the most gangster drift knob ever. Pin pulling action!

 

[S14_CLEAN]

^+3947629 are you drifting at countyline zenki s13? i finally got the 5 speed but i got no money for countyline. if anything i'll probably swing by or something and see that pin grab in action!

 

[カラスVisionLabo]

^+3947629 are you drifting at countyline zenki s13? i finally got the 5 speed but i got no money for countyline. if anything i'll probably swing by or something and see that pin grab in action!

yeah ill driving, more than welcomed to hang out.

 

[Dr. Dooms]

yo thanks bro, you driving at countyline?

i doubt ill be driving but ill be there for sure!!

 

[kakapoopie]

it would be pretty easy to make a wood one on a lathe, then just drill/tap a hole. the threads might not hold up though if they're wood...actually i dont know what im saying

 

[SAS]

im telling you guys this is too much work duct tape is your best friend:bigthumbu

 

[カラスVisionLabo]

i doubt ill be driving but ill be there for sure!!

well i got another harness now. no more lap belt