clutch problems please help

[DownDrifter]

hey guys my slave cyclinder on my clutch went bad. so i changed it and now its not doing anything goes right to the floor and dosent come back up i bleed it correctly, then i thought it was the master cylinder so i replaced it then bleed it and still nothing it goes right to the floor blahhhh im stressed please help!!!

 

[El Abe]

There is a damper on the passenger side underneath the car try to remove the damper and connect the line straight to the slave...

 

[noLSDneeded]

well i changed my slave 2 times before one actually worked, ther first two were bad and they were brand new in the box. might help, good luck.

 

[DownDrifter]

thanks guys if i ran the line straight to the slave would i ahve to replace the hole line or just put it on there?