Block Build

G

gore

Member
Got my block on a stand today and took some photos figured I'd do a progress / build thread. Here are a few shots.

PW2hYl.jpg



CmkFvl.jpg


Here you can see built up on cylinder 3. I will be taking it to the machine shop sooner than later and see what condition I'm in. Hoping to only jump up to a 86.5 bore.
1bXQ5l.jpg



GEcj7l.jpg



As you can see here I'm missing some main caps! If anyone has a set let me know.
EgeKHl.jpg



YuIFxl.jpg



And of course a candid shot of me putting in my s14 belts.
NijzJl.jpg
 
I have em - make me an offer - im in Ft. Laud 954 822 2507 MiKE Call/Text

What machine shop is doing the work for you?
 
Last edited:
gore said:
Got my block on a stand today and took some photos figured I'd do a progress / build thread. Here are a few shots.

http://imgur.com/PW2hYl.jpg


http://imgur.com/CmkFvl.jpg

Here you can see built up on cylinder 3. I will be taking it to the machine shop sooner than later and see what condition I'm in. Hoping to only jump up to a 86.5 bore.
http://imgur.com/1bXQ5l.jpg


http://imgur.com/GEcj7l.jpg


As you can see here I'm missing some main caps! If anyone has a set let me know.
http://imgur.com/EgeKHl.jpg


http://imgur.com/YuIFxl.jpg


And of course a candid shot of me putting in my s14 belts.
http://imgur.com/NijzJl.jpg
Click to expand...

dang bro, sucks that your block got broken in half. atleast it looks like you might be able to make it work with that custom shit. They sell new blocks here alot...... ls1tech.com
 
oh my block is doing fine this is just one I picked up for a build. My compression is a little low 120 across the board. Can't rebuild my block and have a DD. Yeah the shop I'm going to bring it to does ls1's typically. Lets hope when I ask them to bore it to 86.5mm they don't go in inches. :D
 
You must log in or register to reply here.
Back
Top Bottom