slideways12
Spectator
i just finished my 5 speed swap on my s13 and the clutch pedal stays on the floor i tried bleeding it but it still on the floor.
5 speed swap help
- Thread starter slideways12
- Start date
sounds like you didn't do it right. I'd come help but too far away.
You did not bleed it right, if you used new parts just bleed it again. If the Master cylinder goes empty during bleeding, you have to start over.
If you used, used parts.. Check the slave for fluid behind the boot, also check the master cylinder inside the car and make sure there is no fluid.
If you used, used parts.. Check the slave for fluid behind the boot, also check the master cylinder inside the car and make sure there is no fluid.
clubredsilvia
Member
-well if he tried to do it by himself, its impossible to do it right.
Wrong, all it takes is a small tube and a glass or plastic bottle..
slideways12
Spectator
i got every thing new im just having a bit of trouble with the bleeding the pedal is not getting hard and it stays all the way down and it wont come back up. idk what to do its my first swap so its kicking my ass..
Boosted-Alty
Member
maybe you didn't get the clutch fork and the spring right. I have seen that cause this type of problem also. If you are trying to bleed it by your self get some of those speed bleeders. They are the bomb!
slideways12
Spectator
can u let me kno how to put the clutch fork and spring in right so i kno if i did it right