300zx brake swap-which e-brake?

L

lwnslw

NKOTB
putting the 4 piston in the front and 1 piston in the back on my s14! need 2 know which e-brake cable 2 use the turbo or the non-turbo?!?!
 
the rears are 2 pistons...

you need the whole e-brake assymbaly from a 300zx. it dosen't matter if it's turbo or non-turbo. you need more then just line to make it work.

this is a good write up that helped me.

The Definitive 300ZX Brake Swap!



also if your going to do them all around your going to need a Z32 master cylinder.
 
yeah someone told me i need the shield or w.e its called off the rotor...yeah i went to that website but it says non-turbo cable!! :S

how much do z32 master cylinders cost?
 
Last edited:
If you have an s13 you can use the stock z32 ebrake cables.

If you have an s14 you can use stock R33 ebrake cables.

There are other ways to get both to work, but those are the easiest solutions.
 
this is a 300zx that sits 4 people V.S. one that sit's 2.

4 seat = 2+2

the reason the fit is because they are longer so they work good on s14's
 
Tonymac said:
If you have an s13 you can use the stock z32 ebrake cables.

If you have an s14 you can use stock R33 ebrake cables.

There are other ways to get both to work, but those are the easiest solutions.
Click to expand...

would using a r33 cable work in the sense no cutting or extending the cable?
 
You must log in or register to reply here.
Back
Top Bottom