krazybone305
Member
So i just finished droping in a 96 ka motor into my 92 coupe...everything is good to go i timed it following the diy. the motor turns over nicely like if it were going to start but it just keeps turnng over it doesnt want to start anyone have any ideas what i might be missing or doing wrong?? the motors turns with no problem it just wont start.
jus so you guys know:
- motor sat for about a month
-96 ka motor everything else is s13 ( harness dizzy, mani, etc.)
-just filled it with oil
-rad water and water wetter
-removed emission and plugged up lines.
-i think thats it
some smell of gaas here and there from trying to turn it on but not too much
jus so you guys know:
- motor sat for about a month
-96 ka motor everything else is s13 ( harness dizzy, mani, etc.)
-just filled it with oil
-rad water and water wetter
-removed emission and plugged up lines.
-i think thats it
some smell of gaas here and there from trying to turn it on but not too much
