My drift build 360hp KA-T

SKINNY D

SKINNY D

FORZA PRO
Driver
So check it out. i am in the process of putting a car together. but am wondering if 360hp is too much to start drifting. The KA-T that i want to buy in Orlando is putting 360 wheel. heres the parts list. 1. does it seem realistic. 2. is it too much to start with.

KA24DE Engine Components + extra

Engine core $500.00
Orange powder coated valve cover $150.00
ARP Head and main studs $250.00
Ross racing pistons9.0:1 CR $550.00
Pauter H beam forged chromoly rods $720.00
Toga High volume high flow oil pump $270.00
Toga racing main bearings $65.00
Toga racing rod bearings $45.00
Cometic MLS headgasket $125.00
Nismo 720cc injectors $520.00
Nissan Water pump $76.00
Billet distributor cap $150.00
Nismo engine and trans mounts $280.00
Spec clutch stage 4 $550.00
B&M short shifter $265.00
AEM EMS $1,750.00
3 BAR MAP sensor $68.00
GM IAT $23.00
HKS SSQV blow off valve $245.00
Custom turbonetics T3/T4 hybrid turbo $1,650.00
NGK racing plugs $40.00
Custom fabricated intake $1,000.00
Custom 321 SS exhaust turbo manifold and downpipe $1,650.00
85mm throttle body $180.00
Fully balanced engine (TEC) $520.00
Ferrea competition valves $352.00
Ferrea turbo springs $312.00
Ferrea titanium retainers $216.00
Ported and polished cylinder head (Xtreme Cyl heads) $887.00
Tial 38mm wastegate $225.00
Magnecor KV85 racing spark plug wires $85.00
Electomotive DFU $185.00
Nissan ignitors for wastespark $150.00
Turbo outlet pipe with sil hoses and clamps $90.00
SS Turbo oil feed w/filter and return lines -4 and -10 $100.00
45K mile s14 transmission $400.00

Total: $14,644.00
Total price is for components and engine mechanical machning only
This is the list he sent me. I could care less if all the prices are right but its an engine for 5 gs and i want it sooooo bad. what you guys thiink
 
Homie the only I would believe all that shit is really in that motor (besides the obvious bolt ons) is if that dood has receipts or at least pictures to prove it.
OR
If its in a car right now and he can get it dynoed...

If i was joo....
Id give him half...
Swap that bitch in my car...
get it dynoed and when it shows the hp he claims then
i would pay him the other half FTW lol
 
$1000 for custom fabricated intake. Are you kidding? Unless you mean a manifold. But $1650 for a T3/T4 and another $1650 for an exhaust manifold makes me think otherwise.
 
Lmao.

First thing on ur list is powder cover valve covers! Ur sir fail!!

Plus the prices are crazy. But please get it so when it spit outs a rod we can all point and laugh at u!
 
you dont need power to drift when your starting to learn most people feel its better to start low horsepower and learn proper techniques. Get a stock 240 do the suspension and a few bolt ons on the KA and youll be fine you dont need boost to drift.
 
the ka way said:
So check it out. i am in the process of putting a car together. but am wondering if 360hp is too much to start drifting. The KA-T that i want to buy in Orlando is putting 360 wheel. heres the parts list. 1. does it seem realistic. 2. is it too much to start with.

KA24DE Engine Components + extra

Engine core $500.00
Orange powder coated valve cover $150.00
ARP Head and main studs $250.00
Ross racing pistons9.0:1 CR $550.00
Pauter H beam forged chromoly rods $720.00
Toga High volume high flow oil pump $270.00
Toga racing main bearings $65.00
Toga racing rod bearings $45.00
Cometic MLS headgasket $125.00
Nismo 720cc injectors $520.00
Nissan Water pump $76.00
Billet distributor cap $150.00
Nismo engine and trans mounts $280.00
Spec clutch stage 4 $550.00
B&M short shifter $265.00
AEM EMS $1,750.00
3 BAR MAP sensor $68.00
GM IAT $23.00
HKS SSQV blow off valve $245.00
Custom turbonetics T3/T4 hybrid turbo $1,650.00
NGK racing plugs $40.00
Custom fabricated intake $1,000.00
Custom 321 SS exhaust turbo manifold and downpipe $1,650.00
85mm throttle body $180.00
Fully balanced engine (TEC) $520.00
Ferrea competition valves $352.00
Ferrea turbo springs $312.00
Ferrea titanium retainers $216.00
Ported and polished cylinder head (Xtreme Cyl heads) $887.00
Tial 38mm wastegate $225.00
Magnecor KV85 racing spark plug wires $85.00
Electomotive DFU $185.00
Nissan ignitors for wastespark $150.00
Turbo outlet pipe with sil hoses and clamps $90.00
SS Turbo oil feed w/filter and return lines -4 and -10 $100.00
45K mile s14 transmission $400.00

Total: $14,644.00
Total price is for components and engine mechanical machning only
This is the list he sent me. I could care less if all the prices are right but its an engine for 5 gs and i want it sooooo bad. what you guys thiink
Click to expand...

im sorry but i think you are getting rapped,motor mounts don't cost that much,the aem ems you getting rapped and so as the b&m shifter if you wanna some part let me know i get them for you and way less expensive and if you wanna make more power let me know i will do it for way less
 
You must log in or register to reply here.
Back
Top Bottom