Installing Door Panels

[C Hernandez]

I bought door panels and im not really sure how to go about installing them the correct way. Any Suggestions?
THANKS

 

[kennyS13]

they clips all around the boarder that should just pop off

 

[Sketchy564]

you install them the same way you took them off

 

[C Hernandez]

i bought the car without panels so.. yea

 

[benarovi]

well kenny just told you. thats how you do it. you might have to wiggle it around to get them right

 

[Bryan]

240sxtech.com

 

[Sketchy564]

True.. well as long as the tabs are on the door panels and the slots are still in the door, just put it up to the door like it would go and it should pop right in without much problems

 

[C Hernandez]

k thanks guys. this can be closed

 

[Tonymac]

Start by sliding the top of the panel down first - if everything lines up, it all pops in

 

[C Hernandez]

Start by sliding the top of the panel down first - if everything lines up, it all pops in

so it has to be hanging before it gets aligned?

 

[thabeast]

You should be able to slide the top part of the door panel into the area/space between the window and door frame put that part first or else you won't get it right. Once its hanging then you align the clips into the holes and pretty much just bang em down with your hand should hear them go in. There are prob some screws at least one or two one on the panel and the other in the little hand hole space under the handle, depends on which car it is s13 or s14

 

[secrets2k]

lol

 

[C Hernandez]

You should be able to slide the top part of the door panel into the area/space between the window and door frame put that part first or else you won't get it right. Once its hanging then you align the clips into the holes and pretty much just bang em down with your hand should hear them go in. There are prob some screws at least one or two one on the panel and the other in the little hand hole space under the handle, depends on which car it is s13 or s14

thanks

INSTALLED! thanks for all the input