inner tie rod install

6

6thSphere

Member
can someone help me or i'll pay someone to put on a set of inner tie rods for an s13. pls text me at 954 854 0650. thanks
 
its real easy bro, i broke an inner tie rod and had to replace it, i would do it for you but you arent in west palm and i got no money or time to drive :D good luck
biggest thing is to make sure you count exactly how many times the inner is screwed into the outer, as this is your alignment. Advanced auto will rent you out a kit that removes it free of charge also
 
NavySlideby said:
its real easy bro, i broke an inner tie rod and had to replace it, i would do it for you but you arent in west palm and i got no money or time to drive :D good luck
biggest thing is to make sure you count exactly how many times the inner is screwed into the outer, as this is your alignment. Advanced auto will rent you out a kit that removes it free of charge also
Click to expand...

thanks bro, ill try it out.

Chris Jackson said:
ill fo it for 55 lmk 954 635 8196
Click to expand...

i will let you know as soon as i fail. thanks
 
Last edited:
NavySlideby said:
its real easy bro, i broke an inner tie rod and had to replace it, i would do it for you but you arent in west palm and i got no money or time to drive :D good luck
biggest thing is to make sure you count exactly how many times the inner is screwed into the outer, as this is your alignment. Advanced auto will rent you out a kit that removes it free of charge also
Click to expand...



Only problem with renting from advanced is they don't have the right size inner tie rod remover... had to buy one from harbor freight.. yeah.... when I did my tie rods, I didn't count how many times I turned it just because I took it for alignment that same day....
 
i just did mine and i used a big fuckn adjustable wrench it works great you have someone hold the wrench on there and brake it free with your foot cause it takes alot of fuckin torque. Make sure not to damage the locking plate if your not gonna replace it. theres a toutorial on nico thats how i did mine. good luck
 
SAS said:
i just did mine and i used a big fuckn adjustable wrench it works great you have someone hold the wrench on there and brake it free with your foot cause it takes alot of fuckin torque. Make sure not to damage the locking plate if your not gonna replace it. theres a toutorial on nico thats how i did mine. good luck
Click to expand...

just go to harbor freight ....... dont do this
 
You must log in or register to reply here.
Back
Top Bottom