ignition wiring..

[StangSlider]

ok so im putting the whole push button start deal in my 240.. i've got most of it under control. i have a toggle switch for ACC with the blue wire, another toggle switch for IGN with the black and white wire, starter button with the black and yellow wire. the problem is there is one more wire.. its black and green, and i have no idea what it is for?? ground maybe??

 

[FlyinFINN]

You cant find schematics?

 

[s0loWkooPi]

All wires with black on them must touch.

 

[StangSlider]

You cant find schematics?

found stuff on nico but nobody talks about the black and green wire..

All wires with black on them must touch.

?? wat? :vomit:
why?

 

[Elliot G]

you should of tested the wires before you starting hacking stuff up to see how each one is used.

 

[s0loWkooPi]

Ok 2 things:

1. I don't get the smiley

2. Theirs about 6 write ups on this topic

to answer your question, on the side of your ignition switch their are about 5 to 6 wires. 3 are black and have some other striped color (don't know off the top of my head) these must all make contact in order for ignition to occur.

 

[benarovi]

Ok 2 things:

1. I don't get the smiley

2. Theirs about 6 write ups on this topic

to answer your question, on the side of your ignition switch their are about 5 to 6 wires. 3 are black and have some other striped color (don't know off the top of my head) these must all make contact in order for ignition to occur.

boiiii knows his shit

 

[StangSlider]

i dont get the smilely either.. just wanted to use it.
i have hacked anything up..

 

[s0loWkooPi]

:madfawk:

always wanted to use it

 

[StangSlider]

:madfawk:

always wanted to use it

awesome..:rockon:


so seriously wats up with the black and green wire? i dont understand how are all the black wires supposed to touch. i mean i got two toggles and one starter button. what wires go where??

 

[SR]

theres two starter wires...a charge start and crank start they both need to be jumped together