having issues with wiring "auto to manual"

gcliff

gcliff

Driver
me, jeremy, steve, chuck, and zak, and justine, all helped out with my shell to shell swap thanks for all of them, . we did my shell to shell swap into gregs old car which it is factory a auto car and mine is a manual and were having probs with the harness and wiring. We cant get it to start, the fuel pump primes up,, and i get power to electronics, but starter wont click, or the engine wont crank,i asked greg bout the jumping switch and he said thats done,, im missing somethig,,
 
test the start run a wire from the starter seloniod enguage switch to postive battery, that should engage the starter if not your missing grounds and check your power distrubtions
 
well Ive never done it but I did just complete the manual swap for mine. Did you use the 5 speed lower engine harness and check all of your grounds?
 
that wil get the engine to start but,, thats just a tester i need to jump some wires im missing

driftfast180 said:
well Ive never done it but I did just complete the manual swap for mine. Did you use the 5 speed lower engine harness and check all of your grounds?
Click to expand...


yes i used the lower harness, ummwhat harness did u used for the interior, passenger side edu,, u should bring ur car by so i can take a look,, its easier with a picutre ya know
 
where are you at, i can give you a hand, i have done so many of these that the last one i did it with my hand in a cast. pm me with your info to see if i can swing by today after school.
 
charlie a.k.a. chuck said:
did you jump the safety nuetiral switch?
Click to expand...

Thats whats happening, my guess he didnt. there is two big plugs one has a white and a black wire, the other has a black/white and black. dude just call me and i will walk you through it or i will swing by, i cant remember from the top of my head. 786-543-2659
 
well this is on a s14 not sure if its the same
electrical_wiring_harness_connectors_in.jpg
 
yeah its pretty much the same
but you cant actually see nothing in that picture , damn you chuck norris.
 
lmao

help him robert!! he's worked hard on this with never doing it before! it was a blast helping as much as could this past weekend, but wiring is out of my league when it comes to motors
 
yes i used the lower harness, ummwhat harness did u used for the interior, passenger side edu,, u should bring ur car by so i can take a look,, its easier with a picutre ya know[/QUOTE]



MMMM I Live in Jacksonville Fla ;) at least dudocious will be able to hook it up. Hes much better than me anyways
 
lol yup i contacted him,, yes i used passenger side ecu from my manual car,, dam u chuck norris,, why didnt mention that lol
 
well got it every1 woo hooo,,, it was the two plug with black/white and black/yellow i just connected themm,, and the beast came alive,,,


THankx every1 for the Help ,, chuck come here and put tranny fluid in my car lol
 
gcliff said:
well got it every1 woo hooo,,, it was the two plug with black/white and black/yellow i just connected themm,, and the beast came alive,,,


THankx every1 for the Help ,, chuck come here and put tranny fluid in my car lol
Click to expand...
i figured thats what it was..and also ona note if u use the auto ecu u hav no speed cut ;)
 
dam gauges dont work,, but dan suggested i goto Junkyard and get sohc clip next to ecu,, its white 1 any1 got foos,, hey some1 come here and give me gas olooolo
 
gcliff said:
dam gauges dont work,, but dan suggested i goto Junkyard and get sohc clip next to ecu,, its white 1 any1 got foos,, hey some1 come here and give me gas olooolo
Click to expand...


crazy fool!! go steal some gas!

and im glad real drifters could help u out... :p
 
You must log in or register to reply here.
Back
Top Bottom