Anyone in Dade or Broward who installs Springs for less than $180? Let me know.......

JTNismo

JTNismo

Spectator
Anyone in Dade or Broward who installs Springs for less than $180? Let me know how much & location.
 
Last edited:
A Zenki S14, Intrax springs going into stock shocks. I know about the alignment. All I need is the springs in the car for me to take care of the rest.
 
dont be a bitch diy just put it back together the same way u took it apart spring compressors from advance are free to rent
 
jdmnismo300 said:
dont be a bitch diy just put it back together the same way u took it apart spring compressors from advance are free to rent
Click to expand...

Not sure what u r talking about. I never took it apart. I have done s14 spring install before. I just dont care to go through the trouble this time, I rather pay someone to do the job. Also, even if I wanted to, I cant anymore. I have this resently operated inguinal hernia that gets in the way man!

sidewayzs13 said:
me n side wayz will do it 4 $160
Click to expand...
Naw! 20 bucks more will get it done at a friend's shop. Has to be way better savings for me to get it done else where. Thanks for looking out though.
 
sidewayzs13 said:
me n side wayz will do it 4 $160
Click to expand...
hey i was thinking about this too...so what you guys were going to leave me out of the deal. Well look we'll do it at a shop aswell and bring the price down to say about $140....how does that sound
 
z28_scorpio said:
hey i was thinking about this too...so what you guys were going to leave me out of the deal. Well look we'll do it at a shop aswell and bring the price down to say about $140....how does that sound
Click to expand...

This is starting to sound better. I'll wait and see what other responses I get by tomorrow afternoon. Then I'll make up my mind. Keep it coming! Thank you guys!. By the way, where will I have to drive to for this deal? I am in Hollywood.

FlyinFINN said:
$130
Click to expand...

Where are you located? I am in Hollywood.
 
the shop is literally 100 ft from the u pull it on griffen or 441 i always forget the damn street
 
well how i see it you could pay an extra $10 to get your springs installed at a shop using an huge collection of tools...if you live in hollywood this shop would be alot closer then west palm....or you could pay $10 less to drive up to west palm and get your springs installed there....(i dont know if flyinFINN has a shop)..........
and the directions to the shop is get on the turn pike going north and get off on griffin....(if you decide to get them installed with us i'll wait for you once you get off the turnpike cause the streets are a little tricky after that)
 
z28_scorpio said:
well how i see it you could pay an extra $10 to get your springs installed at a shop using an huge collection of tools...if you live in hollywood this shop would be alot closer then west palm....or you could pay $10 less to drive up to west palm and get your springs installed there....(i dont know if flyinFINN has a shop)..........
and the directions to the shop is get on the turn pike going north and get off on griffin....(if you decide to get them installed with us i'll wait for you once you get off the turnpike cause the streets are a little tricky after that)
Click to expand...

I would come to him. You dont need that many tools to install springs. :p Id have to work it around my work schedual though.
 
FlyinFINN said:
I would come to him. You dont need that many tools to install springs. :p Id have to work it around my work schedual though.
Click to expand...
lmao talk about competition :laugh: well your righ... :bigthumbu you really dont need that many tools but its always good to have plenty of good tools incase you run into something...air tools ftw
 
hernia lol the things weighs like 15 pounds lol

z28_scorpio said:
well how i see it you could pay an extra $10 to get your springs installed at a shop using an huge collection of tools...if you live in hollywood this shop would be alot closer then west palm....or you could pay $10 less to drive up to west palm and get your springs installed there....(i dont know if flyinFINN has a shop)..........
and the directions to the shop is get on the turn pike going north and get off on griffin....(if you decide to get them installed with us i'll wait for you once you get off the turnpike cause the streets are a little tricky after that)
Click to expand...

huge collection of tools all u need is a ratchet with 3 different size buckets and spring compressors lol

ill do it for $40 lol
 
You must log in or register to reply here.
Back
Top Bottom