2jz swap help. 2jz guys chime in please.

milkyninja

milkyninja

Driver
k everything is pretty much hooked up, motor turns over fine but... no spark. now theres 3 plugs that look important that go to the sc300 body harness i think.
2jzwiring004.jpg

these 2 plugs are near the driver side and come up from the wiring harness. im pretty sure they connect to the body harness and attach right on the side of the fuse box. one is a 3 wire plug (two of the wires on this plug are low gauge) and the other plug is a 5 wire plug.
2jzwiring006.jpg

this plug is in with the coil pack assembly. there is a plug that goes from distributor to coil pack. another from coil pack to motor harness, but on the way to the motor harness there is a plug that comes off that has a cap on it so im guessing its nothing, and also the plug im holding which im guessing could be for like cruisecontrol?
well if anyone might know or any diagrams that you know of lmk. i appreciate it. 561 634 1478
 
plugs in first pic would go to sc300 fuse box. You are going to need a wiring diagram for your car and one for the 2jzge


plug in 2nd pic is for maf sensor.
 
Last edited:
naw thats plugged in. look in the first pic. its on the right

---------- Post added at 05:08 PM ---------- Previous post was at 05:08 PM ----------

ohh okay yeah now just those other 2 plugs
 
You must log in or register to reply here.
Back
Top Bottom